Pioneer 50L Roof Rack Water Tank 1210 x 600 x 85mm UV-Stabilised

Low-profile water storage for roof racks and trailers

The Pioneer 50L water tank is a flat-profile polyethylene tank measuring 1210 x 600 x 85 mm. It mounts to roof racks, trailer beds and load bars where vertical clearance is limited. The 50-litre capacity supplies drinking water, wash water or spray-down supply on overland trips, campsites and remote work sites.

The tank body uses UV-stabilised polyethylene that resists sun degradation during long outdoor exposure. The material is BPA-free and food-grade, so stored water remains suitable for drinking and cooking. A recessed outlet sits flush with the tank face and protects the fitting from impact during loading and transit. The low 85 mm profile keeps the centre of gravity close to the rack surface.

Mounting points along the tank perimeter accept standard roof rack hardware. The flat base distributes load across the rack slats and reduces point stress on the platform. The tank fills through a top-mounted cap with a secure seal. Gravity feed works from the recessed outlet, and users can add an inline pump where pressure is required. The dimensions match common Pioneer platform footprints, which simplifies accessory planning.

A small breather hole in the cap prevents pressure build-up as the tank warms during the day. This avoids bulging and lets air displace water when the outlet opens. Drain and flush the tank between trips to keep stored water fresh. The polyethylene body tolerates typical ambient temperature swings without cracking.

Key Features

• 50-litre capacity
  The tank holds 50 litres of water for drinking, washing and equipment rinse-down.

• Flat 85 mm profile

  • 1210 x 600 x 85 mm footprint
  • Low centre of gravity on roof racks
  • Fits under raised shelves and rack accessories

• UV-stabilised polyethylene
  The body resists sun damage during extended outdoor storage and travel.

• Food-grade BPA-free material
  The tank stores potable water without BPA leaching or odour transfer.

• Recessed outlet
  The outlet sits flush with the tank face and protects the fitting from knocks.

• Perimeter mounting points
  Standard hardware lands on moulded points along the tank edge.

• Vented fill cap
  A small breather hole prevents pressure build-up and allows smooth gravity flow.

Specifications

What’s in the Box

• One 50-litre roof rack water tank

• Fill cap

Why Choose This Roof Rack Tank

• The 85 mm profile keeps the tank below most raised shelves and rack accessories.

• Food-grade polyethylene supports potable water storage without a separate liner.

• Recessed outlet hardware stays protected when the rack is loaded with gear.

• UV stabilisation extends service life on vehicles that sit outdoors.

• Perimeter mounting points adapt to common roof rack platforms.

people also view

• Nexa UTP CAT6 Outdoor CCA 305M
• Nexa F/UTP CAT6 Outdoor 305M Full Copper Cable
• Vention VAA-B02 Flat HDMI Cable 10M, 4K 60Hz, 18Gbps
• OEM PDU10 Series 6-Way IEC C13 PDU Black
• OEM PDU10 Series 8-Way UK Plug PDU Black