SnoMaster ZBC-15 Water Box Motor Replacement for 15kg Ice Maker

Replacement Water Circuit Motor for ZBC-15 Ice Makers

The SnoMaster water box motor is the replacement drive unit for the water circuit on the ZBC-15 counter-top ice maker. It restores water circulation when the original motor stalls or fails. The part carries reference 200070 and fits the ZBC-15 chassis without modification.

The motor mounts inside the water box assembly and drives the impeller that moves water across the evaporator. A failed unit stops ice production and often triggers the water-low indicator. This replacement unit matches the mounting pattern and shaft coupling of the original component.

Installation requires access to the water box behind the evaporator cover. Isolate the ice maker from mains power before removing the old motor. Transfer the impeller and mounting screws to the new unit, then reconnect the wiring harness to the original terminals. Run a test cycle and confirm water flows across the evaporator before returning the unit to service.

Regular descaling extends the service life of the water circuit. Scale deposits increase load on the motor and can seize the impeller. Clean the water tank, water box, and evaporator with a mild detergent as part of the routine maintenance schedule. Check the impeller for debris after each cleaning and replace the motor if it emits abnormal noise or fails to turn.

Key Features

• Direct ZBC-15 Compatibility
  The mounting pattern and shaft coupling match the original water box motor on the ZBC-15 ice maker.

• Part Reference 200070
  The unit carries the 200070 part number for ordering and identification.

• Restores Water Circulation

  • Drives the impeller that moves water across the evaporator
  • Replaces a stalled or noisy original motor
  • Fits inside the existing water box assembly

• Original Wiring Interface
  The motor connects to the existing harness terminals without adapter plugs.

• Serviceable Design
  The impeller and mounting screws transfer from the failed unit during replacement.

Specifications

What’s in the Box

• 200070 water box motor

Why Choose This Replacement Motor

• Restores ice production on a ZBC-15 unit without replacing the whole appliance.

• Matches the original mounting points and shaft coupling for straightforward installation.

• Connects to the existing wiring harness without adapter plugs.

• Keeps the water circuit serviceable as part of routine ice maker maintenance.

people also view

• Vention SATA 15-Pin Power Splitter 90-Degree 0.15m Black
• Brother PT-H110 Label Maker, 12mm TZe Tapes, 20mm/sec
• Dymo LabelManager 160 Portable Label Maker
• Dymo 260 Label Manager 260P Portable Label Maker, Rechargeable Li-ion, D1 Tapes
• DYMO LabelManager 160P Portable Label Maker, QWERTY Keyboard, 12mm Tape Support