SnoMaster Ice Full Sensor ZBC15 – Replacement Part for Counter-Top Ice Maker

Replacement Ice Level Detection for SnoMaster ZBC-15

The SnoMaster ice full sensor restores bin-level detection on the ZBC-15 counter-top bullet ice maker. It signals the control board when the ice basket reaches capacity and pauses production. The plug-in replacement matches the original connector and mounting point.

The sensor monitors the upper zone of the ice basket. When ice accumulates to the detection point, the sensor output changes state and the controller illuminates the Ice Full indicator. The controller then stops the compressor and ice-making cycle until ice is removed.

Installation requires removing the rear or top service panel to access the sensor bracket. The sensor clips into the bracket and connects to the main board via a keyed plug. No calibration or software configuration is required after replacement.

A failed ice full sensor often causes the machine to stop producing ice prematurely or to continue running until ice overflows. The Ice Full indicator may stay dark even when the basket is full. Replacing the sensor resolves these symptoms without touching the control board.

After installation, run a test cycle and confirm the indicator lights when the basket fills. The sensor requires no adjustment; the control board reads its state automatically. Keep the sensor lens or probe clean to maintain accurate detection.

The ZBC-15 produces up to 15 kg of bullet ice per 24 hours and stores 2 kg in the basket. The ice full sensor monitors the basket level to prevent overflow in this high-output cycle. The sensor operates inside the ice maker cabinet and resists moisture and low temperatures.

Key Features

• Direct Replacement
  The sensor matches the factory mounting point and connector on the ZBC-15 chassis.

• Ice Full Detection
  The probe detects accumulated ice at the top of the basket and triggers the Ice Full indicator.

• Plug-and-Play Connector
  A keyed plug connects to the main control board without splicing or soldering.

• Durable Housing
  The sealed sensor housing resists moisture and low temperatures inside the ice maker.

• Restores Automatic Operation
  Replacing a failed sensor returns automatic bin-level control and prevents overflow.

• Genuine SnoMaster Part
  The sensor carries part number 200067 and matches ZBC-15 production specifications.

• ZBC-15 Compatibility
  The sensor is designed specifically for the SnoMaster ZBC-15 counter-top ice maker.

Specifications

What’s in the Box

• Ice full sensor

• Mounting clip

• Instruction sheet

Why Choose This Sensor

• Restores automatic bin-level control and stops ice production when the basket is full.

• Eliminates manual monitoring and prevents ice overflow onto the counter.

• Prevents compressor overrun by pausing the cooling cycle at capacity.

• Genuine SnoMaster spare part ensures fit and function.

• Simple plug-in installation requires no calibration.

people also view

• Brother PT-H110 Label Maker, 12mm TZe Tapes, 20mm/sec
• Dymo LabelManager 160 Portable Label Maker
• Dymo 260 Label Manager 260P Portable Label Maker, Rechargeable Li-ion, D1 Tapes
• DYMO LabelManager 160P Portable Label Maker, QWERTY Keyboard, 12mm Tape Support
• MikroTik Metal 5 CPE N-Male Connector (RBMetal5SHPn-US)