Snomaster ZBC-15 Ice Pusher Hinge Stainless Steel Replacement Part

Replacement Hinge for Ice Pusher Mechanism

The Snomaster ice pusher hinge is a direct replacement component for the ice pusher assembly in the ZBC-15 counter-top ice maker. It restores smooth movement to the pusher arm that ejects ice from the evaporator. The hinge uses stainless steel construction to resist corrosion in wet conditions.

The part matches the original mounting points and pin diameter. Installers remove the old hinge, align the new unit and secure the retaining pins. No drilling or modification is required. The stainless steel surface wipes clean with a damp cloth.

Ice makers operate in damp environments, so hinge material matters. Stainless steel resists rust and maintains movement over repeated cycles. The hinge pin diameter and bracket thickness follow the original ZBC-15 specification. Check the pusher arm for wear when replacing the hinge, because a bent arm strains the new part.

Replacement follows a short sequence. Disconnect power, drain the water reservoir and remove the ice basket. Release the retaining clip on the old hinge and slide it off the pusher shaft. Fit the new hinge, seat the clip and test the pusher arm by hand before restoring power. Confirm the arm swings freely without binding.

Routine maintenance extends hinge life. Wipe mineral deposits from the pin area with a mild detergent solution. Do not use abrasive pads, because they scratch the stainless steel surface and promote corrosion. Lubricate the pin with a food-grade silicone grease every six months if the ice maker runs continuously.

Compatibility is limited to the Snomaster ZBC-15 counter-top ice maker. The part does not fit other ice maker models or earlier Snomaster revisions. Confirm the model number on the rating plate before ordering. The hinge ships as a single unit with retaining pins included.

Key Features

• Stainless Steel Construction
  The hinge body and pin resist corrosion in the damp ice maker interior.

• Direct Replacement Fit
  Mounting points and pin diameter match the original ZBC-15 pusher assembly.

• Tool-Free Retaining Clip

  • The clip releases by hand for quick removal
  • No drilling or bracket modification required

• Smooth Pusher Action
  The hinge maintains alignment between the pusher arm and the evaporator plate.

• Corrosion Resistance
  Stainless steel surfaces tolerate repeated wet cycles without rusting.

• Single-Unit Packaging
  The hinge ships with retaining pins for a complete replacement.

• Serviceable Design
  The pin accepts food-grade silicone grease during routine maintenance.

• Model-Specific Compatibility
  The part fits Snomaster ZBC-15 counter-top ice makers only.

Specifications

What’s in the Box

• Ice pusher hinge

• Retaining pins

Why Choose This Replacement Hinge

• The stainless steel body resists rust in a constantly wet interior.

• Direct-fit mounting removes the need for drilling or bracket work.

• A hand-release clip shortens replacement time during service calls.

• The pin diameter matches the original shaft for correct pusher alignment.

• Food-grade silicone grease extends service intervals on continuous-duty machines.

• Single-unit packaging keeps spare-part stock simple for maintenance teams.

people also view

• Vention RJ45 Cat6 Shielded Inline Coupler Female to Female
• Fellowes 2200001 Hand Protection Foam 50ml
• Brother PT-H110 Label Maker, 12mm TZe Tapes, 20mm/sec
• Dymo LabelManager 160 Portable Label Maker
• Lightwave TC-PS-120 Adjustable 1.2m Projector Stand