Free delivery in Nairobi CBD for orders above KES 20,000
LC to SC UPC OS2 Single Mode Duplex Fiber Patch Cord 20m
Limited Stock
LC to SC UPC OS2 Single Mode Duplex Fiber Patch Cord 20m
| Connector A | LC/UPC, duplex |
| Connector B | SC/UPC, duplex |
| Fibre mode | OS2 single mode |
| Core/cladding | 9/125 µm |
| Length | 20 m |
| Wavelength range | 1260-1625 nm |
| Insertion loss, LC | ≤ 0.3 dB |
| Insertion loss, SC | ≤ 0.5 dB |
| Return loss | ≥ 50 dB |
| Jacket material | LSZH |
| Cable diameter | 1.8 mm |
Same day Delivery
Delivery
We deliver to the address you provide. Nairobi is often same-day on business days.
Across the country
Delivery outside CBD starts from KES 300
Warranty 1 year
72-hour (3-day) returns
Description
Duplex Single Mode Jumper
The LC to SC OS2 patch cord links LC-ported transceivers to SC patch panels across a 20 m run. Two OS2 fibres sit in a yellow LSZH jacket. Numbered connectors mark polarity so duplex pairs stay consistent at both ends.
The 9/125 µm core carries 1260-1625 nm wavelengths, which covers CWDM channels and 100G optics. UPC polish on both ferrules holds return loss at 50 dB or better. Insertion loss stays at 0.3 dB or below on the LC end and 0.5 dB on the SC end.
The 1.8 mm jacket passes through high-density trays and cable managers. Aramid yarn carries pull load during installation, and the bend-insensitive fibre tolerates a 10 mm loaded radius. Each assembly is tested for insertion loss before packing, and a test report travels with the cord.
Key Features
Mixed LC and SC Connectors
LC/UPC plugs mate with SFP and SFP+ ports, while SC/UPC plugs seat in panel adaptors.OS2 Single Mode Fibre
The 9/125 µm core supports long-haul runs and CWDM over 1260-1625 nm.Duplex Construction
- Two fibres with flipped pair polarity.
- Numbered connectors keep TX and RX consistent.
UPC Ferrule Polish
Ultra physical contact ends return 50 dB or better at each connector.Low Insertion Loss
The LC end measures 0.3 dB maximum and the SC end 0.5 dB maximum.LSZH Jacket
The low-smoke zero-halogen sheath suits enclosed rooms and riser spaces.Bend-Insensitive Core
A 10 mm loaded bend radius allows tight routing inside cabinets.Tested Assembly
Each cord ships with an insertion loss test report.
Specifications
| Feature | Specification |
|---|---|
| Connector A | LC/UPC, duplex |
| Connector B | SC/UPC, duplex |
| Fibre mode | OS2 single mode |
| Core/cladding | 9/125 µm |
| Fibre count | 2 |
| Length | 20 m |
| Wavelength range | 1260-1625 nm |
| Insertion loss, LC | ≤ 0.3 dB |
| Insertion loss, SC | ≤ 0.5 dB |
| Return loss | ≥ 50 dB |
| Jacket colour | Yellow |
| Jacket material | LSZH |
| Cable diameter | 1.8 mm |
| Bend radius (loaded) | 10 mm |
| Polarity | Pairs, flipped |
| Operating temperature | -20°C to 70°C |
| Standards | ITU-T G.652.D, IEC 61300-3-4 |
What’s in the Box
20 m LC/UPC to SC/UPC duplex single mode patch cord
Insertion loss test report
Dust caps on all four connectors
Why Choose the Single Mode Jumper
Connects an LC switch port to an SC panel without a second adaptor cord.
Yellow LSZH sheath makes single mode runs easy to trace in a dense rack.
Test report gives procurement a documented loss figure per cord.
Bend-insensitive fibre survives tight cabinet routing without added attenuation.
UPC ferrules keep reflectance low on CWDM and 100G links.
20 m span covers inter-cabinet and cross-floor connections.
Julius Wambua (verified owner) –
Imefika vizuri, coiled neatly in the bag.
Susan Chepkoech (verified owner) –
Loss was within spec on both directions.
Harrison Kamau (verified owner) –
Poa
Mercyline Atieno (verified owner) –
SC side fits the ODF, LC side fits the SFP.
Samuel Ndegwa (verified owner) –
20m run reached the far cabinet without coupling.