9000BTU Split Air Conditioner R410a 220V Cooling Only

Wall-Mounted Cooling for Small Rooms

The 9000BTU Split Air Conditioner is a cooling-only split system supplied as one indoor evaporator unit and one outdoor condenser unit. It runs on 220-240 V single phase at 50 Hz and charges with R410a refrigerant. The set suits bedrooms, small offices and site cabins.

An inverter compressor modulates speed instead of cycling on and off. Rated input sits near 820 W with a coefficient of performance around 3.5. Airflow reaches 450 m³/h, and the seasonal efficiency ratio is quoted at 37.5. Those figures target rooms up to roughly 90 square feet.

Each box weighs about 39 kg and occupies 0.2 cbm, so a two-person lift handles the outdoor unit. The indoor panel ships in white. A handheld remote controls mode, fan speed, temperature and the timer. App control is available through the onboard wireless module.

Installation needs a dedicated circuit breaker sized to the rated current, plus a wall bracket for the outdoor condenser. Keep the outdoor coil clear of recirculation and allow service access to the flare connections. Condensate drains by gravity, so route the hose with a continuous fall.

Clean the indoor filters every two weeks in dusty conditions. A choked filter drops airflow and pushes the compressor harder. Refrigerant work requires a licensed technician and recovery equipment. The unit carries a one-year warranty.

Key Features

• Inverter Compressor
  Modulates motor speed to hold setpoint instead of cycling the compressor on and off.

• Cooling-Only Operation
  The system runs a cooling circuit only, with no reverse-cycle heating valve.

• R410a Refrigerant
  Charged with R410a, which carries a lower ozone depletion figure than R22.

• Performance Figures

  • 820 W rated input at nominal conditions.
  • Coefficient of performance near 3.5.
  • 450 m³/h maximum airflow.
  • SEER quoted at 37.5.

• Remote and App Control
  A handheld remote sets mode, fan speed and timer, and a wireless module supports app control.

• Split Configuration
  The indoor evaporator and outdoor condenser ship as separate units joined by field flare connections.

• Compact Shipping Volume
  Each unit weighs about 39 kg and occupies 0.2 cbm for freight planning.

Specifications

What’s in the Box

• 1 x indoor evaporator unit, white

• 1 x outdoor condenser unit

• 1 x remote handset

• Installation kit and documentation

Why Choose This Split System

• The inverter drive holds room temperature within a narrow band and avoids the swing of fixed-speed cycling.

• R410a refrigerant keeps the circuit within current supply and service practice.

• Separate indoor and outdoor sections keep compressor noise out of the occupied room.

• Remote and app control cover both bench setup and day-to-day adjustment.

• The 9000 BTU frame suits single rooms where a larger cassette would short-cycle.

people also view

• Vention 3.5mm to 4-Pole Audio Cable 0.3m Black ABS
• Fanvil A212 SIP Speaker Wall-mounted PoE 20W – A212
• Apple MacBook Air 15 M2 8GB RAM 256GB SSD Silver
• Apple MacBook Air 15-inch M2, 8-core CPU, 10-core GPU, 8GB RAM, 256GB SSD, Silver
• Apple MacBook Air M4 10-core CPU 16GB RAM 256GB SSD 13.6"