12000 BTU Air Conditioner Split System R410a 220-240V Cooling Only

Wall-Mounted Split Cooling System

The 12000 BTU air conditioner is a wall-mounted split system that delivers 3.52 kW of cooling from a 220–240 V single-phase supply. It runs on R410a refrigerant and ships as a matched indoor and outdoor pair. The unit provides cooling only, with no reverse-cycle heating circuit.

The indoor fan moves roughly 600 m³/h across four discharge directions. A rotary compressor drives the outdoor circuit at an EER near 3.1 W/W. Liquid and gas lines use 6.35 mm and 9.52 mm flare connections, with a maximum run of 20 m and 10 m elevation.

Both sections ship in separate cartons totalling about 0.25 m³ and 45 kg per set. The indoor chassis measures 786 x 255 x 199 mm, and the outdoor unit measures 733 x 545 x 287 mm. Installers hang the evaporator on a wall bracket and site the condenser on a level plinth with free airflow.

Key Features

• 12,000 BTU/h cooling capacity
  The rated output equals 3.52 kW and suits rooms of roughly 18 to 25 m² in a T1 climate.

• R410a refrigerant circuit
  The factory-charged circuit runs at higher pressure than R22 and requires dedicated manifold gauges.

• Rotary compressor
  The single-rotary compressor holds a compact footprint and low vibration at part load.

• Air distribution

  • Four-way louvre movement for horizontal and vertical sweep.
  • Roughly 600 m³/h indoor airflow volume.
  • 42 dB(A) indoor and 50 dB(A) outdoor sound pressure.

• Washable intake filter
  The mesh screen lifts out of the fascia for rinsing and traps dust before the evaporator coil.

• Auto restart
  The controller resumes the previous setpoint and fan mode after a mains interruption.

• Infrared remote control
  The handset sets temperature, fan speed, louvre position and timer from across the room.

• Custom logo fascia
  The indoor front panel accepts a customer-supplied logo for project or fleet branding.

Specifications

What’s in the Box

• Indoor wall-mounted evaporator unit

• Outdoor condenser unit with rotary compressor

• Infrared remote handset and wall bracket

• Installation fasteners and drain hose

Why Choose This Split Cooler

• The split format keeps compressor noise outside the room, unlike a window or portable chassis.

• R410a remains widely stocked, so service technicians can recharge the circuit without a refrigerant change.

• The 6.35 mm and 9.52 mm flare ports match standard pre-flared line sets sold in the region.

• Auto restart protects cooling continuity on sites with unstable mains supply.

• Separate cartons at 0.25 m³ per set keep freight and site storage requirements predictable.

• The washable filter reduces recurring consumable spend across a multi-unit installation.

people also view

• Vention 3.5mm to 4-Pole Audio Cable 0.3m Black ABS
• Apple MacBook Air 15-inch M2, 8-core CPU, 10-core GPU, 8GB RAM, 256GB SSD, Silver
• Apple MacBook Air 15 M2 8GB RAM 256GB SSD Silver
• Apple MacBook Air 15.3" M2 8-Core CPU 10-Core GPU 8GB 512GB SSD Starlight
• Apple MacBook Air M4 10-core CPU 16GB RAM 256GB SSD 13.6"