Front Runner LBSK015 Roof Load Bar Pair 1345mm – T6 Aluminium, 3kg

Modular Crossbar Pair for Overhead Gear Mounting

The Front Runner LBSK015 is a pair of 1345 mm roof load bars built from black epoxy powder-coated T6 aluminium. Each bar carries a T-slot profile that accepts Front Runner accessories along its full length. The set ships as a complete conversion kit with slats, end caps and the load bar box.

The kit consists of two RRSS1345 slats, an RRAC044 slat-to-load-bar conversion end cap set, and a telescopic load bar box. Bars use a heavy-duty thru-bar profile rather than a flush crossbar. Installed weight is approximately 3 kg. Shipping dimensions measure 110 mm wide, 1405 mm long and 65 mm high at 4 kg packed.

The T-slot channel accepts eyebolts, tie-down rings, bike carriers, rooftop tents and awning brackets without drilling. Powder coating resists UV fade and road salt across repeated seasons. Steel hardware in the mounting kit carries a corrosion-resistant finish. The 1345 mm span suits wide-body 4×4, van and canopy fitments.

Fit the bars to a compatible Front Runner foot set or canopy track kit. Torque the mounting hardware to the figures printed in the fitting instructions and recheck after the first loaded trip. Bars mount parallel or at a slight stagger depending on the accessory. Keep the T-slot clean of grit so accessory brackets slide freely. Remove rooftop tents and heavy cargo before automated vehicle washes. Inspect the powder coat at each service and touch up stone chips to limit oxidation. The bars pair with the Slimline II accessory range, so existing mounts transfer across builds. Store the bars in the supplied box during seasonal removal.

Key Features

• T6 Aluminium Construction
  The bars use T6 aluminium with a black epoxy powder coat for strength and weather resistance.

• 1345 mm Bar Length
  Each bar measures 1345 mm to suit wide-body vehicles, vans and canopy fitments.

• Complete Two-Bar Kit

  • Two RRSS1345 slats
  • RRAC044 slat-to-load-bar end cap kit
  • Telescopic load bar box for storage

• T-Slot Accessory Channel
  The slot accepts Front Runner brackets anywhere along the bar without drilling.

• Heavy-Duty Thru-Bar Profile
  A thru-bar cross-section carries racks, cargo boxes and rooftop tents.

• Low Installed Weight
  The pair adds roughly 3 kg to the vehicle roof once fitted.

• Steel Mounting Hardware
  Corrosion-resistant steel fasteners secure the bars to compatible foot sets.

Specifications

What’s in the Box

• Two 1345 mm load bars

• Slat-to-load-bar conversion end cap kit

• Telescopic load bar box

• Fitting instructions

Why Choose the LBSK015

• The modular crossbar set adds carrying capacity without a full roof rack.

• T-slots accept existing Front Runner mounts, so accessories transfer between builds.

• The powder-coated finish resists road salt and long sun exposure.

• A 1345 mm span covers wide 4×4 and van roof widths.

• The pair weighs about 3 kg, which limits roof load and fuel penalty.

• The supplied storage box protects the bars between trips.

people also view

• Logitech Rally TV Mount VESA Compatible for Video Bars
• Ugreen USB-C to USB-C 3m Braided Cable 5A
• OEM PDU10 Series 8-Way UK Plug PDU Aluminium
• Logitech Rally Bar Mini 4K UHD All-in-One Video Bar with AI Viewfinder
• Govee G1 Gaming Light Kit Monitor Backlight RGB