Free delivery in Nairobi CBD for orders above KES 20,000
PEG ANCHOR MEDIUM 5 PACK 200mm x 5mm
Original price was: KSh 700.00.KSh 500.00Current price is: KSh 500.00. ex VAT
PEG ANCHOR MEDIUM 5 PACK 200mm x 5mm
| Product type | Ground anchor peg |
| Size | Medium |
| Length | 200 mm |
| Shaft diameter | 5 mm |
| Pack quantity | 5 pieces |
| Material | Steel |
| Application | Tents, awnings, gazebos |
Same day Delivery
Delivery
We deliver to the address you provide. Nairobi is often same-day on business days.
Across the country
Delivery outside CBD starts from KES 300
Warranty 1 year
72-hour (3-day) returns
Description
Ground anchor peg for tents and awnings
The PEG ANCHOR MEDIUM is a 200 mm steel ground peg supplied in a five-piece pack. Each anchor measures 5 mm in diameter and suits tent, awning and gazebo guy lines on grass, gravel and soft soil. The medium gauge balances holding force against weight for general camping use.
The shaft runs 200 mm from tip to hook, which gives enough buried length to resist lateral pull in firm ground. A formed hook at the top captures guy rope up to 6 mm diameter. The 5 mm shaft diameter resists bending under moderate wind load without adding bulk to the peg bag.
Drive each anchor at a 45-degree angle away from the tent wall so the load pulls against the buried shaft. Use a mallet on the hook shoulder, not the shaft, to avoid deforming the top. Withdraw with a peg extractor or a hook pull. Store the set dry to limit surface corrosion between trips.
The five-pack covers a standard four-person tent footprint with one spare anchor. Each peg weighs approximately 35 g, so the full set adds about 175 g to a pack. The plain steel finish suits dry-climate camping, and a light oil coat after wet trips extends service life.
Key Features
200 mm buried length
The shaft drives deep enough to hold guy lines in firm grass and compacted gravel.5 mm shaft diameter
The medium gauge resists bending under moderate wind load without adding pack weight.Formed hook head
- Captures guy rope up to 6 mm diameter
- Accepts a mallet strike on the shoulder
- Allows a peg extractor to pull the anchor
Five-piece pack
The set covers a four-person tent footprint with one spare anchor for replacements.Steel construction
Plain steel stock suits dry-climate camping and accepts a light oil coat for corrosion control.45-degree drive angle
Angled placement loads the buried shaft against pull rather than the hook alone.
Specifications
| Feature | Specification |
|---|---|
| Product type | Ground anchor peg |
| Size | Medium |
| Length | 200 mm |
| Shaft diameter | 5 mm |
| Pack quantity | 5 pieces |
| Material | Steel |
| Head type | Formed hook |
| Guy rope capacity | Up to 6 mm diameter |
| Approximate unit weight | 35 g |
| Approximate pack weight | 175 g |
| Drive angle | 45 degrees from vertical |
| Application | Tents, awnings, gazebos |
| Surface finish | Plain steel |
What’s in the Box
Five 200 mm ground anchor pegs
Why Choose This Anchor Set
The 200 mm shaft holds guy lines in firm ground without the weight of long expedition pegs.
A five-pack covers a standard tent footprint and leaves one spare for replacements.
The formed hook accepts common guy rope diameters and a mallet strike.
At roughly 175 g for the set, the pegs add little load to a camping pack.
Steel stock tolerates repeated driving and withdrawal on gravel and grass.




Reviews
Clear filtersThere are no reviews yet.