Impact Punch Down Tool HT-324B 110/88 IDC with Reversible Blade

110/88 IDC Termination Tool

The Impact Punch Down Tool seats conductors into 110 and 88 type IDC blocks on patch panels, keystone jacks and cross-connect frames. A spring-loaded impact mechanism drives the blade with consistent force. The hardened steel blade reverses between a punch-only end and a punch-and-cut end.

The tool body measures roughly 140 mm in length and weighs about 114 grams. High-impact plastic forms the handle and houses the spring mechanism. A storage cavity in the handle top holds one spare square blade. The reversible blade locks into the nose with a simple pull and rotate action.

The impact action seats 22 to 26 AWG solid copper conductors without deforming the IDC contact. The cut side trims excess wire flush after termination. The tool works on Cat5e, Cat6 and Cat6A patch panels as well as voice cross-connects. No adjustable pressure dial is fitted; the spring delivers a fixed strike force.

A rubberised grip section reduces hand slip during long termination runs. The blade holder accepts standard square-profile replacement blades. Field technicians carry the unit in a tool pouch because the 140 mm body fits shallow cabinets. The striker resets after each punch, so the next conductor seats on the following press.

Key Features

• Reversible Punch and Cut Blade
  One end seats the conductor and the other end trims the wire flush after termination.

• 110 and 88 IDC Compatibility
  The blade profile fits both 110-type and 88-type terminal blocks used in voice and data cabling.

• Spring Impact Mechanism

  • Fixed strike force seats conductors consistently across a patch field
  • No pressure dial to adjust or drift during use
  • Spring return resets the striker after each punch

• Hardened Steel Blade
  The blade holds its edge through repeated terminations on solid copper conductors.

• Spare Blade Storage
  A cavity in the handle top carries one additional square blade for field replacement.

• Compact 140 mm Body
  The short handle fits inside crowded patch cabinets and wall boxes.

• Rubberised Grip
  The textured grip section limits hand slip during long cabling runs.

• Standard Square Blade Holder
  The nose accepts common square-profile replacement blades for field service.

Specifications

What’s in the Box

• HT-324B termination tool

• Reversible 110/88 blade

• Spare blade in handle storage

Why Choose This Termination Tool

• The fixed spring strike removes pressure adjustment steps during large patch panel jobs.

• One tool covers both 110 and 88 blocks, which reduces the number of items carried to site.

• The reversible blade trims wire flush without a separate cutter.

• Handle storage keeps a spare blade with the tool instead of in a separate case.

• The compact body reaches terminals inside shallow wall boxes and dense 1U panels.

• Rubberised grip improves control on long termination sessions.

• Replaceable square blades extend service life beyond the supplied edge.

people also view

• OEM HT-324B Impact Punch Down Tool with 110/88 Blade
• OEM HT-324B Impact Punch Down Tool 110/66 Blade
• Ugreen 15W Car Wireless Charger Qi Mount
• D-Link NPP-C61BLK481 48-Port Cat6 UTP 2U Patch Panel
• APKR Cat 6 24-Port Loaded Patch Panel 1U 19-Inch