Front Runner RRAC134 Rack Accessory Lock Small 3-Digit Combination Cable Lock

Combination Cable Lock for Rack-Mounted Gear

The Front Runner RRAC134 is a small rack accessory lock that secures gear mounted to a Slimline II roof rack. It uses a three-digit combination dial instead of a key, so no keyring or spare key travels with the vehicle. The lock body weighs 30 g and measures 87 x 30 x 39 mm.

The casing and inner core are cast in zinc alloy, which resists impact on a loaded roof rack. The cable is stainless steel wire with a PVC coating, and it measures 100 mm long and 2.8 mm wide. A corrosion-resistant tumbler keeps the dial turning after exposure to rain, dust and coastal salt.

Set a personal combination by turning the dial through the reset sequence in the instructions. Thread the cable through the eyelet of a compatible holder and close the lock body. The 100 mm cable suits tight mounting brackets, while longer cables tend to rattle on corrugated roads.

The lock fits holders for axes, tables, Hi-Lift jacks, water tanks and Wolf Pack Pros. Listed compatibility covers part numbers JADA010, WTAN016, RRAC023, RRAC116, RRAC117 and RRAC120. Confirm the holder part number on the bracket before ordering, because older brackets can have a different eyelet size.

Rack accessories are sold separately, and this lock ships as a single unit. Carry a spare in the vehicle toolbox when the rack holds several removable items. Record the combination in a secure place, because a forgotten code means cutting the cable. Inspect the PVC coating each season and replace the lock if the wire core shows through.

A combination lock removes the key-management problem on a shared vehicle. Rental fleets and overland hire companies can issue one code to a customer and reset it between trips. The zinc alloy body also resists casual tampering better than a plastic-bodied luggage lock.

Clean the lock with fresh water after coastal travel and dry it before storage. Apply a light silicone spray to the dial if it stiffens, but avoid oil that attracts dust. Do not use the cable as a lifting point or tie-down anchor, because it is a security device and not a load-bearing sling.

Weight matters on a roof rack, and 30 g per lock adds almost nothing to the payload. Fit one lock per removable accessory rather than looping several items onto one cable, because a bundle allows the whole load to shift. Check the lock tension after the first off-road leg.

Key Features

• Three-Digit Combination Dial
  The resettable dial removes the need for keys and allows a personal code.

• Zinc Alloy Body
  The cast casing and inner core resist impact and casual tampering on a loaded rack.

• Stainless Steel Cable
  The 100 mm wire core carries a PVC coating that protects paint and resists corrosion.

• Front Runner Holder Compatibility

  • Fits JADA010, WTAN016, RRAC023, RRAC116, RRAC117 and RRAC120 holders
  • Suits axe, table, Hi-Lift jack, water tank and Wolf Pack Pro brackets

• Corrosion-Resistant Tumbler

  • Dial mechanism tolerates rain, dust and coastal salt
  • Stainless cable resists rust at the crimped ends

• Compact 30 g Body
  The small lock adds minimal weight and fits behind most mounting brackets.

Specifications

What’s in the Box

• 1 x 3-digit combination cable lock

• Combination setting instructions

Why Choose This Rack Lock

• The combination cable lock avoids key handling on shared fleet vehicles.

• Zinc alloy construction stands up to vibration and weather on a roof rack.

• The coated stainless cable protects powder-coated brackets from scuffing.

• One lock per holder keeps each accessory independently secured.

• The 100 mm cable reaches through standard Front Runner bracket eyelets.

• A 30 g body adds negligible payload on long overland routes.

people also view

• OEM M61 85kg Overhead Door Closer
• Vention 4K Flat HDMI Cable 2M Nylon Braided Zinc Alloy
• Vention 10M 4K HDMI Braided Cable Zinc Alloy