Toshiba 6LK54342000 STAY-GUIDE-READ3 Eject Guide Stay

Eject Section Stay for e-STUDIO 5506AC Series

The Toshiba 6LK54342000 is a STAY-GUIDE-READ3 bracket from the paper eject unit of the e-STUDIO 5506AC, 6506AC and 7506AC multifunction systems. Toshiba lists it as item 21 in the eject assembly parts table. The bracket holds the read guide in position at the front of the eject path.

The stay shares its sub-assembly with the SPL-PLT-EJECT split plate, the ASYS-FRONT-EJECT and ASYS-REAR-EJECT assemblies, and the SPG-EJECT-READ3 spring. It supports the guide that steers sheets through the eject section. Two mounting points take the M3 hex screws listed in the same parts group. The bracket is a formed metal pressing.

Order the part when the guide loses alignment, the bracket bends, or the eject section rattles after a jam. A deformed stay lets the read guide lift under sheet pressure, which produces skew or corner folding on exit. Inspect the mating plate and spring at the same time, because a bent stay usually follows a forced jam clearance. Fit the replacement with the eject assembly drawn out of the chassis.

Record the machine serial number and the old bracket code before ordering. The number appears on the eject assembly exploded diagram, which makes identification straightforward. Work from the service manual procedure for the 5506AC series rather than a general e-STUDIO guide, since the eject hardware changed between generations.

Key Features

• Formed Metal Stay Bracket
  The pressing supports the read guide under sheet pressure in the eject path.

• Eject Unit Position
  Toshiba lists the stay as item 21 in the front and rear eject assembly group.

• Model Fitment

  • e-STUDIO 5506AC
  • e-STUDIO 6506AC
  • e-STUDIO 7506AC

• Two-Point Fixing
  The bracket takes two M3 hex screws listed in the same parts group.

• Matched Sub-Assembly Parts
  The stay pairs with the SPL-PLT-EJECT plate and the SPG-EJECT-READ3 spring.

• Guide Alignment Function
  The bracket keeps the read guide square to the eject rollers.

• Diagram-Indexed Part Number
  The code prints on the eject assembly exploded view for quick identification.

Specifications

What’s in the Box

• One STAY-GUIDE-READ3 eject stay bracket

Why Choose This Eject Bracket

• The part number maps directly to the eject unit diagram, so no dimensional check is needed.

• A rigid stay keeps the read guide square and limits skew on exiting sheets.

• Fitting the bracket with the eject assembly out of the chassis keeps the job short.

• Pairing it with the split plate and spring restores the whole eject group in one visit.

• Genuine fitment avoids the clearance errors common to pattern parts.

people also view

• CCTV camera buying guide for Kenyan homes and shops
• Printer buying guide: laser vs inkjet for offices in Kenya