Pioneer PA354 Bracket for 5L, 10L and 20L Adventure Tanks

Adventure Tank Roof Rack Mounting Hardware

The Pioneer PA354 bracket is a bolt-down clamp plate that secures 5 L, 10 L and 20 L Adventure Tanks to a vehicle or trailer. A threaded stud and R-clip retain the tank on the clamp. Fit the bracket to a steel roof rack.

The mounting plate uses a clamp layout with a single threaded stud. The stud passes through the bracket and the R-clip locks the assembly in place. This hardware keeps the tank base seated during vehicle movement. The PA354 suits water and fuel tanks in the Adventure range. Its bolt-down format suits permanent rack installations.

Installation requires a steel roof rack with a flat mounting surface. The bracket bolts down to the rack and holds the tank base. Check fastener torque and R-clip engagement after installation. Inspect the clamp and stud regularly on rough terrain. Remove the R-clip before lifting the tank off the bracket.

Key Features

• Bolt-Down Clamp Plate
  The clamp plate bolts to a steel roof rack and forms the load-bearing base for the tank.

• Threaded Stud and R-Clip Retention

  • The threaded stud aligns the clamp and tank base.
  • The R-clip locks the stud to prevent loosening.

• Multi-Capacity Compatibility
  One bracket design fits 5 L, 10 L and 20 L Adventure Tanks.

• Vehicle or Trailer Mounting
  The bracket attaches to steel roof racks on vehicles and trailers.

• Field-Serviceable Hardware
  The R-clip and threaded stud allow tool-light removal and refitting of the tank.

Compatibility and Installation Notes

Use the PA354 with Adventure Tanks that have the matching base profile. The bracket requires a steel roof rack; it does not clamp to plastic or glass surfaces. Route the tank outlet and cap clear of the clamp and R-clip. Recheck the stud and clip after the first loaded trip.

Specifications

What’s in the Box

• 1 x PA354 bracket assembly

• 1 x threaded stud

• 1 x R-clip

Why Choose This Tank Mount

• The clamp plate provides a stable mounting interface between the tank base and the roof rack.

• A single R-clip retention point simplifies tank removal at camp and refitting at the vehicle.

• The bracket accepts three tank sizes, which reduces the number of mounting parts to carry.

• Steel roof rack installation keeps the tank outside the vehicle cabin and clear of interior cargo.

people also view

• Promate BIKEMOUNT-2 SecureMount 360° Rotatable Bike Mount 4.7"-6.9"
• Rexel Secure X6 P4 Cross Cut Shredder 6-Sheet Capacity 10L Bin
• Fellowes MS-450Cs Micro-Cut Shredder, 7-Sheet Capacity, 20L Pull-Out Bin
• Starlink High Performance Wall Mount Heavy-Duty Adjustable Steel Bracket
• D-Link Rack Mount Kit for 11-inch and 19-inch Managed Switches