Adapter Box 255x200x80mm IP65 ABS Weatherproof Junction Enclosure White

Sealed Enclosure for Terminals and Cable Joints

The Adapter Box 255x200x80 is a surface-mount enclosure for electrical, network and equipment connections. It measures 255 mm long, 200 mm wide and 80 mm deep, which leaves room for terminal blocks, adapters and multiple cable runs. White ABS plastic forms the body and lid.

A gasketed lid closes against the rim and holds an IP65 rating. That rating blocks dust ingress and defends against water jets from any direction. Four captive screws clamp the cover evenly, and the moulded wall thickness resists impact in service areas. The internal floor accepts DIN rail, standoffs or direct screw fixing depending on the installation.

Knock-outs and pre-marked cable entry points sit on the side walls. Installers drill or punch the required gland size without cracking the housing. Operating temperature spans -20°C to 80°C, and the ABS compound carries RoHS compliance. The box suits distribution points, CCTV junctions, access control wiring and communications terminations.

Key Features

• IP65 Sealed Construction
  A moulded gasket and captive lid screws keep dust out and resist water jets from any angle.

• Generous Internal Volume

  • 255 x 200 x 80 mm outer dimensions
  • Room for terminal blocks and multiple cable entries
  • Suits DIN rail or direct screw fixing

• Impact-Resistant ABS Body
  The thermoplastic housing absorbs knocks in plant rooms, risers and outdoor cabinets.

• Marked Cable Entry Points
  Side-wall knock-outs guide gland drilling and keep entry holes aligned.

• Surface Mount Fixing
  Rear mounting holes accept screws into masonry, timber or metal backboards.

• Wide Temperature Range
  The assembly operates from -20°C to 80°C in indoor and sheltered outdoor positions.

Specifications

What’s in the Box

• 255 x 200 x 80 mm adapter box body

• Gasketed lid with four captive screws

• Mounting screws

Why Choose This Junction Enclosure

• The IP65 seal protects terminals in wash-down areas and sheltered outdoor positions.

• Extra depth allows several cable glands and a terminal block on the same enclosure floor.

• ABS construction resists corrosion where metal boxes would rust.

• Captive lid screws stay with the cover, so service visits do not lose fasteners.

• Marked entry points reduce drilling errors during first-fix installation.

• The flat rear face mounts cleanly on masonry, plywood and metal backboards.

people also view

• OEM 255X200X80 IP66 PVC Adapter Box
• OEM 150X150X80 IP66 Waterproof Junction Box Adapter
• TP-LINK TL-EAP225 Outdoor AC1350 Wireless Access Point
• Generic Self-Drilling Hex Head Screws 5.5mm x 25mm with EPDM Gasket (200pcs)
• OEM #8 x 1/2" Pan Head Self-Tapping Screws