Free delivery in Nairobi CBD for orders above KES 20,000
VGA Cable 2M 15-Pin Male to Male SVGA Monitor Lead with Ferrite and Triple Shielding
Original price was: KSh 283.00.KSh 240.00Current price is: KSh 240.00. ex VAT
VGA Cable 2M 15-Pin Male to Male SVGA Monitor Lead with Ferrite and Triple Shielding
| Length | 2m |
| Connector type | VGA HD15 male to HD15 male |
| Pin count | 15 pins, all connected |
| Conductor gauge | 28AWG bare copper |
| Shielding | Foil, braid and drain wire |
| Ferrite cores | 2 |
| Contact plating | Gold |
| Supported resolutions | Up to 1920×1200 |
| Impedance | 75 ohm |
| Compliance | RoHS |
Same day Delivery
Delivery
We deliver to the address you provide. Nairobi is often same-day on business days.
Across the country
Delivery outside CBD starts from KES 300
Warranty 1 year
72-hour (3-day) returns
Description
Analog Display Lead for Legacy and Modern Ports
The VGA Cable 2M connects a VGA output to a monitor, projector or TV across a two-metre run. It carries analog RGBHV video and DDC data through a 15-pin HD15 male connector at each end. The assembly suits desktops, laptops and presentation switchers with legacy ports.
28AWG bare copper conductors handle the RGB, sync and DDC lines. Triple shielding combines aluminium foil, copper braid and a drain wire to reject EMI and RFI. Two ferrite cores clamp common-mode noise at the cable ends, which keeps the image stable near power supplies and switching equipment.
The lead supports 800×600 SVGA, 1024×768 XGA, 1600×1200 UXGA, 1920×1080 Full HD and 1920×1200 WUXGA. Gold-plated contacts resist oxidation across repeated mating cycles. A 7.3mm PVC jacket routes through trunking, and molded strain reliefs protect the solder joints at both plugs.
Key Features
HD15 Male to Male Termination
Both ends use a 15-pin high-density D-sub plug that seats in standard VGA female ports.Triple-Shielded Construction
- Aluminium foil layer blocks high-frequency interference
- Copper braid carries induced currents to ground
- Drain wire bonds the shield to the connector shell
Dual Ferrite Cores
Two ferrite beads suppress common-mode noise that causes ghosting and colour shift.28AWG Bare Copper Conductors
Solid copper signal paths avoid the losses of copper-clad steel at two metres.Gold-Plated Contacts
The plated pins resist corrosion in humid rooms and after repeated plug cycles.Molded Strain Relief
Flexible boots protect the solder terminations when the cable bends behind a monitor.1920×1200 Support
The analog path carries WUXGA and 1080p signals to LCD and LED displays.
Specifications
| Feature | Specification |
|---|---|
| Length | 2m |
| Connector type | VGA HD15 male to HD15 male |
| Pin count | 15 pins, all connected |
| Conductor gauge | 28AWG |
| Conductor material | Bare copper |
| Shielding | Foil, braid and drain wire |
| Ferrite cores | 2 |
| Contact plating | Gold |
| Jacket material | PVC |
| Outside diameter | 7.3mm |
| Supported resolutions | 800×600, 1024×768, 1600×1200, 1920×1080, 1920×1200 |
| Impedance | 75 ohm |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -20°C to 70°C |
| Compliance | RoHS |
What’s in the Box
2m VGA HD15 male to male cable
Protective caps on both connectors
Why Choose This Monitor Lead
Two ferrite cores and triple shielding hold a clean image beside power distribution.
28AWG bare copper keeps attenuation low over the full two-metre span.
Gold-plated pins survive repeated patching in shared meeting rooms.
All 15 pins connect, so DDC identification works with older projectors.
The 7.3mm jacket fits standard cable trunking and desk grommets.
Molded boots reduce conductor stress when the lead bends at the monitor.




Kevin Oduor (verified owner) –
Poa, screen clear from the start.
Mary Njoki (verified owner) –
Works well
Brian Wekesa (verified owner) –
Two metres fits the desk fine.
Catherine Mueni (verified owner) –
Ferrite beads keep the picture steady, no flicker.
Dennis Kipchumba (verified owner) –
Solid