Mecer IUPDU 3.68kVA 8-Outlet UPS PDU

IUPDU 3.68kVA PDU

The Mecer IUPDU 3.68kVA power distribution unit combines UPS-grade power conditioning with an integrated outlet strip for rack and floor-standing backup installations. Rated at 3.68 kVA, this unit distributes protected AC power to up to eight IEC outlets from a single upstream UPS or inverter source. Network administrators and facilities engineers use IUPDU models to consolidate power delivery inside server closets where multiple low-draw devices share one backup circuit.

The included input connector, plug, and cable provide a complete connection path from the UPS output to the PDU input without sourcing separate power cords. Eight IEC outlets accept standard C13 equipment plugs found on servers, switches, firewalls, and monitoring appliances. This outlet count supports typical edge rack deployments where a handful of 1U devices require conditioned power during utility outages.

At 3.68 kVA capacity, the PDU handles aggregate loads across all connected devices while remaining within the thermal and current ratings of internal bus bars and breaker protection. Load planning requires summing device nameplate wattage and applying a diversity factor based on measured consumption rather than theoretical maximum draw. Overloading the PDU trips internal protection and disconnects downstream equipment until the fault clears.

Mounting options depend on enclosure design; many IUPDU units install vertically in rack posts or horizontally on shelf brackets. Cable management at the rear keeps input and output leads organized to maintain airflow paths required by adjacent active equipment. Label each outlet circuit in the rack diagram to speed troubleshooting when a single device loses power during maintenance.

Grounding continuity from the UPS output through the PDU chassis to each outlet ground pin protects personnel and equipment during fault conditions. Verify the upstream UPS output voltage and frequency match the PDU input rating before energizing connected servers. Use colour-coded power cords to distinguish primary and redundant feed paths in dual-UPS rack architectures.

Monitor aggregate load with a clamp meter during peak business hours to confirm headroom below the 3.68 kVA ceiling. Schedule outlet additions when new devices push sustained draw above eighty percent of rated capacity. Document which outlet serves each asset in the configuration management database for faster incident response during partial power events.

Key Features

• 3.68 kVA Power Rating
  Supports aggregate protected load up to 3.68 kilovolt-amperes across all outlets.

• Eight IEC Outlets
  Distributes conditioned power to eight connected devices through standard IEC receptacles.

• Complete Input Assembly

  • One input connector for UPS attachment
  • One plug and integrated cable included in the package

• UPS Distribution Role

  • Extends single UPS output to multiple rack-mounted devices
  • Maintains power path integrity during battery backup operation

• Rack Infrastructure Integration
  Designed for deployment alongside Mecer UPS systems in IT and telecom environments.

Specifications

What’s in the Box

• IUPDU 3.68kVA power distribution unit

• Input connector

• Plug and power cable

Why Choose IUPDU 3.68kVA

• Consolidates eight device connections onto one protected UPS output circuit

• 3.68 kVA rating matches common small-to-medium rack power budgets

• Included cable and connector reduce procurement steps during rack buildout

• IEC outlets support the majority of enterprise networking and server hardware

• Purpose-built for Mecer UPS ecosystems with compatible connector standards