Easenet Cat6 UTP 3m Patch Cord RJ45 PVC 24AWG

Three-Metre Cat6 Network Lead

The Easenet Cat6 3m cord connects a switch port to a workstation or access point across a three-metre run. Four unshielded twisted pairs of 24AWG stranded copper sit under a PVC jacket. Moulded RJ45 plugs on both ends carry strain relief and snagless clips.

The assembly supports 250MHz bandwidth and Gigabit Ethernet, with 10G operation over short channel lengths. Stranded copper conductors keep the lead flexible inside dense patch fields. Wiring follows TIA/EIA-568-B.2, and the cord meets Cat6 channel requirements. Characteristic impedance holds at 100Ω ±15Ω, and propagation delay stays below 548 ns per 100 m.

Moulded connectors protect the plug latch during installation and repeated patching. The PVC compound resists scuffs in cabinet and desk environments. Operating temperature spans 0°C to 60°C for indoor deployment. The three-metre length reaches between adjacent racks without excess slack. The lead carries PoE and PoE+ current without exceeding conductor temperature limits.

Key Features

• 24AWG Stranded Copper Conductors
  Seven-strand copper per conductor keeps the lead flexible and carries PoE current across the 3m span.

• Moulded RJ45 Plugs
  Strain relief boots and snagless clips protect the latch during pulls through dense patch fields.

• Cat6 Electrical Performance

  • 250MHz bandwidth for Gigabit Ethernet
  • Up to 10Gbps over short channel lengths
  • Wiring follows TIA/EIA-568-B.2
  • 100Ω ±15Ω characteristic impedance
  • Propagation delay under 548 ns per 100 m
  • Delay skew under 45 ns per 100 m

• PVC Jacket
  The flexible compound suits indoor cabinet and desk routing while resisting everyday scuffs.

• Three-Metre Reach
  The 3m length spans adjacent racks without excess slack in the cable tray.

• Power over Ethernet Ready
  The conductor set supports IEEE 802.3af and 802.3at current levels for IP phones and access points.

• Gold-Plated Contacts
  50 µin gold over nickel plating on the plug contacts limits oxidation across repeated mating cycles.

Specifications

What’s in the Box

• 3 m Cat6 UTP RJ45 patch cord

Why Choose This Patch Lead

• The three-metre length removes slack between adjacent rack units.

• Moulded plugs survive repeated moves and changes without latch damage.

• 24AWG stranded copper carries PoE and Gigabit traffic on the same run.

• The PVC jacket suits indoor cabinet and desk environments.

• Tested Cat6 performance supports channel acceptance records.

people also view

• Hikvision Cat 6 23AWG UTP 305m Copper Cable
• Easenet Cat6 UTP 1M RJ45 Patch Cord
• Easenet Indoor Copper UTP Cat 6 305M 23AWG
• Easenet Cat6 3m Patchcord RJ45 Gigabit Ethernet
• Easenet 6-Way 1U 19-Inch Rackmount PDU