Toshiba T-6518P Toner Cartridge Black 106,600 Pages for e-STUDIO 5518A/6518A/7518A/8518A

High-Yield Black Cartridge for A3 Mono Copiers

The Toshiba T-6518P toner is a black cartridge rated for 106,600 pages on the e-STUDIO 5518A, 6518A, 7518A and 8518A mono copiers. It ships as a sealed unit and carries part number 6AG00008445. The cartridge weighs about 1,694 g.

The page figure assumes 5 percent coverage on A4. Mixed A3 output and dense graphics raise consumption per page. Compare the printed counter against the panel reading to plan reorders before the supply warning appears.

The cartridge seats in the supply station behind the front door. Release the retaining lever, pull the empty unit straight out, and slide the replacement along the guide rails until it clicks. Close the door and let the copier run its density setup.

Store spares flat, away from direct sunlight and heat. Keep the sealed bag intact until installation. A cartridge held in a hot store room for months can clump, which shows as banding on the first few hundred pages.

Quality faults after fitting usually trace to a protective seal left in place or a cartridge that is not fully seated. Check both before opening a service call. The control panel reports remaining supply level and updates that figure after each calibration cycle.

Key Features

• 106,600-Page Yield Rating
  The cartridge carries a high page rating that suits monthly volumes on A3 mono copier fleets.

• Four-Model Compatibility

  • Fits e-STUDIO 5518A and 6518A chassis
  • Fits e-STUDIO 7518A and 8518A chassis
  • Shares one part number across the range

• Sealed Cartridge Assembly
  The unit arrives sealed, which protects the supply from humidity and dust before installation.

• Part Number 6AG00008445
  The manufacturer code identifies the correct supply during procurement and stock checks.

• Front-Access Replacement
  The supply station opens from the front door, so technicians swap the cartridge without moving the copier.

• Panel Level Reporting
  The copier displays remaining supply level and refreshes it after each density calibration.

• 1,694 g Unit Mass
  The cartridge weight matches the original assembly, so the drive train sees no extra load.

Specifications

What’s in the Box

• One T-6518P black toner cartridge, sealed

• Protective shipping packaging

Why Choose the T-6518P

• A single supply code covers four A3 mono chassis, which simplifies spares holding.

• The high page rating cuts the number of swap events per quarter on busy floors.

• Front-door access keeps replacement inside a routine service visit.

• Sealed packaging protects the powder during long storage in humid conditions.

• Panel level reporting removes guesswork from reorder timing.

people also view

• Toshiba HDKPJ41A1A01 2TB Internal Hard Drive
• HP 205A Cyan Original LaserJet Toner Cartridge – CF531A