Siemon MX6-02 UTP Module CAT6 Angled RJ45 Jack T568A/B White

CAT6 Angled Outlet for Structured Cabling

The Siemon MX6-02 angled jack is a Category 6 UTP outlet for structured cabling. It uses 110-style punch-down termination and supports T568A and T568B wiring. The angled body directs patch cords downward for tidy cable management.

The MAX6 module fits Siemon MAX faceplates and frames. Up to six outlets mount in a single-gang frame and twelve in a double-gang frame. A protective door shields the contacts from dust and contaminants.

Performance exceeds Category 6 connecting hardware limits and remains backward compatible with lower categories. The jack supports 10BASE-T, 100BASE-TX and 1000BASE-T applications. Rear strain relief caps accept cable before or after termination.

Key Features

• Angled MAX6 Design
  The angled body routes patch cords downward to reduce front clearance requirements.

• 110 Punch-Down Termination
  Standard 110 single-position tooling completes conductor termination during installation.

• Universal Wiring

  • T568A and T568B colour markings on the module
  • Backward compatible with Category 5e and Category 3 systems

• Protective Door
  An integrated shutter limits dust ingress when the port is unused.

• High-Density Mounting
  Slim side-stackable housing allows six modules per single-gang faceplate.

• Front or Rear Installation
  Installers can latch the module from either side of a compatible faceplate.

• 250 MHz Bandwidth
  The module carries Category 6 performance to 250 MHz with margin to the connecting hardware limit.

• Phase-Delay Tuned Circuit Board
  Siemon tunes and balances the PCB to maximise NEXT margin across the frequency range.

• PoE Ready
  The jack supports Power over Ethernet delivery for access points, cameras and desk phones.

• Colour-Matched Icons
  Each module ships with one red, one blue and one matching icon for port labelling.

Specifications

What’s in the Box

• Siemon MX6-02 angled UTP module

• Rear protective strain relief cap

• Three port icons

Why Choose This MAX6 Outlet

• The angled face reduces patch cord bend radius at the wall.

• Universal T568A/B labelling removes wiring ambiguity on site.

• Slim housing supports dense outlet configurations in shared work areas.

• Protective door keeps dust out of unused ports during construction phases.

• 110 termination matches standard punch-down tooling for faster installs.

• Phase-delay tuning holds NEXT margin at 250 MHz for stable Gigabit links.

people also view

• Siemon MX6-02 MAX 6 UTP Module CAT6 White
• Siemon Cat 6 Modules MAX RJ45 UTP T568A/B
• OEM S-TEK 50-Piece Networking Maintenance Toolkit
• OEM SC-SC APC 1m OM3 Multimode Fiber Patch Cord
• OEM SC-SC APC OM3 2m Fiber Patch Cord