Apple A2337 Screen Assembly – MacBook Air 13″ M1 2020, 2560×1600, Space Grey

Complete Top Lid Replacement for the M1 Air

The Apple A2337 screen is a complete top lid assembly for the MacBook Air 13-inch M1 2020. It ships as one factory-assembled unit with the LCD, cover glass, aluminium lid, hinges, camera and antenna modules. Technicians replace the whole lid rather than a bare panel.

The 13.3-inch panel runs 2560 x 1600 at 60 Hz with IPS switching and roughly 300 nits of brightness. A glossy cover glass sits over the display. The 30-pin eDP interface uses a controller board and ribbon that terminate at the logic board connector.

Space Grey anodising matches the factory lid colour. True Tone needs an Apple Service Toolkit calibration after fitting. Cable routing and hinge tension require experience on this chassis. Apple services these machines by replacing the full lid, and the same approach applies to this part.

Key Features

• Factory-Style Complete Lid
  The assembly arrives with the panel, glass, lid, hinges and antenna modules pre-fitted, which shortens bench time on display repairs.
• 2560 x 1600 Retina Panel
  The 13.3-inch IPS panel resolves 2560 x 1600 at 60 Hz with approximately 300 nits and a glossy finish.
• 30-Pin eDP Interface
  • Controller board and ribbon terminate at the logic board connector.
  • Pinout follows the A2337 (M1, 2020) service specification.
  • Compatible with EMC 3598 model identifiers MGN63, MGN93, MGND3, MGN73, MGNA3 and MGNE3.
• True Tone Support
  The panel carries the True Tone hardware, and an Apple Service Toolkit session restores the ambient-light calibration after installation.
• Space Grey Anodised Aluminium
  The lid colour and finish match the factory Space Grey chassis without visible mismatch.
• Integrated Camera and Antenna
  The FaceTime HD camera, microphone array and Wi-Fi antenna modules sit in the lid as supplied by the factory.

Specifications

What’s in the Box

• Space Grey top lid assembly with Retina panel and cover glass
• Pre-fitted hinges, camera and antenna modules
• Protective packaging

Why Choose This Lid Assembly

• One part covers panel, glass, lid and hinges, which reduces parts handling on repair benches.
• The 2560 x 1600 IPS panel matches the original resolution and viewing angles for design and office work.
• Pre-fitted camera and antenna modules remove the need to transfer delicate assemblies from the damaged lid.
• The 30-pin eDP ribbon follows the factory routing, which keeps reassembly predictable.
• Space Grey anodising matches the chassis finish without a visible colour break.
• True Tone hardware is present, so calibration restores automatic white-point adjustment.

people also view

• OEM SD-30W 30W Dual Tone Siren Horn
• Soundcore Space One Over-Ear Adaptive ANC Headphones
• Ugreen US270 USB-C to USB-A Adapter – UG-50283
• Apple MacBook Air 15 M2 8GB RAM 256GB SSD Silver
• OEM 100x100x70 Adapter Box IP65 PVC Enclosure