40X5168 Pick Tires Replacement Pickup Rollers for C746 C748 CX410 X748 Printers

Replacement Pickup Rollers for Laser Printers

The 40X5168 pick tires are user-replaceable pickup rollers that restore reliable paper feed on compatible laser printers and multifunction devices. Each pack contains two tires. Replace them at approximately 120,000 pages, or sooner if misfeeds and double feeds appear. The part is RoHS compliant.

The tires fit the paper pick-up assembly and grip the top sheet of the media stack. Worn rubber loses friction and causes skewed pages, repeated pickup attempts and jam codes at the feed station. A new pair restores the original feed force without replacing the whole roller shaft.

Installation takes minutes on most chassis. Open the paper tray, release the roller retaining clip and slide the old tire off the shaft. Clean the shaft with a dry lint-free cloth before fitting the replacement. Seat the new tire fully on the hub and confirm it rotates freely by hand. Close the tray and run a test print before returning the device to service.

Compatibility covers the C746, C748, CS748, CX410, CX510, X543, X544, X548, X748 and XS748 families. Check the printer model plate before ordering, because feed assemblies differ between series. The two-tire pack suits one machine service or two single-side replacements. Store spare tires in a sealed bag away from direct sunlight and ozone sources, since rubber hardens over time.

Feed problems often trace to more than the tires. Inspect the separation pad and the media tray lift plate during the same service visit. Contaminated paper, high humidity and overfilled trays accelerate tire wear. Set the tray guides snug against the stack and fan the media before loading. These habits extend the interval between roller replacements.

Key Features

• Two Tires per Pack
  The pack supplies both pickup tires needed for a single feed assembly service.

• 120,000-Page Replacement Interval
  The manufacturer recommends inspection and replacement at approximately 120,000 printed pages.

• User-Replaceable Design

  • Retaining clip releases the tire from the pickup shaft
  • No specialist tools or shaft removal required
  • Fitment confirmed by hand rotation before testing

• Broad Series Compatibility
  The tires fit C746, C748, CS748, CX410, CX510, X543, X544, X548, X748 and XS748 models.

• RoHS Compliant
  The part meets the Restriction of Hazardous Substances directive for electronic equipment.

• Feed Reliability Restoration
  New rubber compound restores grip on the media stack and reduces misfeed codes.

Specifications

What’s in the Box

• Two 40X5168 pickup tires

• Installation reference

Why Choose These Pickup Tires

• The two-tire pack matches the quantity needed for one feed assembly service.

• User-replaceable mounting cuts downtime compared with a full roller assembly swap.

• New rubber restores feed grip and reduces repeated pickup attempts.

• The 120,000-page interval supports planned maintenance schedules.

• RoHS compliance meets procurement requirements for office equipment parts.

• Broad model coverage simplifies spare-part stock across mixed printer fleets.

people also view

• IDP Long Sleeve Cleaning Card Kit (10-Pack) for Smart Printers
• Logitech Driving Force Shifter 6-Speed H-Pattern for G29/G920/G923
• Fellowes Cosmic 2 A4 Laminator 125 Micron 30cm/min
• Epson C13S041183 Inkjet Cleaning Sheets A4 3-Pack
• IDP Smart S51 Black Monochrome Ribbon 1200 Prints