10-Way PDU Multi Aluminum 1.5U UK Plug 10 Outlet 19-Inch Rack Power Distribution Unit

Rack-Mount Power Distribution Unit

The 10-way PDU consolidates equipment power into a single 1.5U strip that mounts in a standard 19-inch cabinet. Ten UK-pattern outlets sit along the aluminium face and connect to a BS 1363 input plug. The horizontal format keeps outlets visible and accessible at the rear of a rack.

The aluminium alloy body carries the outlet modules and provides a rigid mounting surface for the rack power strip. A master switch with an indicator sits on the face, so technicians can isolate the strip without pulling the input plug. The 1.8 m nominal lead reaches a nearby wall outlet or rack-mounted power source.

Install the strip above or below switches, routers, storage shelves and monitor positions. Group loads by device type, then calculate the total against the BS 1363 plug and branch circuit rating. Label each outlet before connecting equipment. The 1.5U height leaves space for active hardware in dense cabinets.

Key Features

• Ten UK Outlets
  Ten BS 1363 socket positions distribute power to switches, routers, storage and display equipment.

• 1.5U Rack Format
  The horizontal chassis occupies 1.5 rack units in a standard 19-inch cabinet.

• Aluminium Alloy Housing
  The metal enclosure supports outlet modules and resists flexing during cable installation.

• BS 1363 Input Plug
  A UK three-pin plug connects the strip to a compatible 220–250V AC supply.

• Master Switch and Indicator
  A front-panel switch isolates all outlets and an indicator shows power status.

• Rack Mounting Brackets
  Brackets align the strip with 19-inch rack rails and secure it with standard cage nuts or screws.

• Load Planning Support
  The ten-outlet layout simplifies balancing connected equipment across one input circuit.

Specifications

What’s in the Box

• PDU with attached UK plug lead

• Rack mounting brackets

• Screw kit

• Installation guide

Why Choose This 19-Inch PDU

• Ten outlets replace multiple trailing strips inside a cabinet and reduce floor clutter.

• The 1.5U metal chassis keeps power modules aligned and accessible during maintenance.

• A single BS 1363 input point simplifies isolation and circuit tracing.

• The horizontal rack layout leaves adjacent units free for active equipment.

• UK socket spacing supports standard plugs and adapters used in network rooms.

people also view

• 8-Way PDU Aluminum 1.5U Rackmount UK Plug
• XFORM 10-Way PDU Multi Aluminum – 1.5U UK Plug
• OEM Power Cable 1.5M IEC C13 BS1363