MikroTik RB4011iGS+5HacQ2HnD-IN 10-Port Gigabit Dual-Band AC Router

RB4011iGS+5HacQ2HnD-IN

The MikroTik RB4011iGS router is an indoor wireless router that combines ten Gigabit Ethernet ports, an SFP+ uplink, and integrated dual-band 802.11ac Wi-Fi in a compact desktop chassis. It differs from the RB4011iGS+RM, which ships without wireless radios. Model RB4011iGS+5HacQ2HnD-IN targets branch offices, managed service deployments, and high-throughput home labs that need wired density and local WLAN on one RouterOS platform.

Processing power comes from an Annapurna Labs Alpine AL21400 quad-core CPU running at 1.4 GHz on a 32-bit ARM architecture. The unit carries 1 GB of RAM and 512 MB of NAND storage. RouterOS v7 ships preinstalled with license level 5, which unlocks advanced routing, firewall, VPN, and wireless features without a separate software purchase. IPsec hardware acceleration supports encrypted tunnel workloads at rates documented by MikroTik for this platform.

Wired connectivity centers on ten 10/100/1000 Mbps Ethernet ports managed through a Realtek RTL8367SB switch chip. Ports are grouped in two sets of five, each behind the switch, and support Auto MDI/X. Ethernet1 accepts passive PoE input from 18 to 57 V DC. Ethernet10 provides passive PoE output up to 57 V for powering downstream access points or radios. A dedicated SFP+ cage adds 10 Gbps fiber or copper uplink capacity when paired with a compatible module.

Wireless coverage uses two independent radio paths. The integrated 5 GHz radio employs a Qualcomm QCA9984 chipset with four transmit chains and four spatial streams, supporting 802.11a/n/ac at up to 1733 Mbps aggregate data rate. The 2.4 GHz band runs on a removable R11e-2HnD miniPCI-e card with two chains, delivering 802.11b/g/n at up to 300 Mbps for legacy clients. External antennas provide 3 dBi gain on both bands with 360-degree coverage. Combined Wi-Fi class is AC2000.

Power flexibility supports a 12 to 57 V DC barrel jack or passive PoE on port 1. Maximum draw reaches 44 W when PoE-out is active on port 10, or 23 W without downstream PoE load. Passive cooling and a metal enclosure suit rack-adjacent desk placement. Operating temperature is rated from -40°C to 45°C. An RJ45 serial console port defaults to 115200 baud for out-of-band recovery.

RouterOS enables VLANs, bridge filtering, OSPF, BGP, MPLS, CAPsMAN controller mode, and hotspot services on this hardware. The international -IN variant supports 2412 to 2484 MHz on 2.4 GHz and 5150 to 5875 MHz on 5 GHz, subject to local regulatory limits. Kenya deployments should confirm allowed channels before outdoor or high-power use.

Key Features

• Quad-Core AL21400 Platform
  Four ARM cores at 1.4 GHz with 1 GB RAM handle routing, firewall, and VPN tables without the bottlenecks seen on entry-level SOHO units.

• Ten Gigabit Ethernet Ports
  Ten switched RJ45 interfaces give dense LAN segmentation for access switches, IP cameras, and VoIP phones on a single desktop unit.

• SFP+ 10 Gbps Uplink
  One SFP+ port accepts MikroTik-compatible SFP or SFP+ modules for fiber backhaul or high-speed core attachment.

• Dual-Band 802.11ac Wireless

  • 5 GHz: 4×4 MIMO, QCA9984, up to 1733 Mbps, 802.11a/n/ac
  • 2.4 GHz: 2×2 MIMO, R11e-2HnD miniPCI-e, up to 300 Mbps, 802.11b/g/n

• Passive PoE In and Out

  • PoE-in on Ethernet1 from 18 to 57 V DC
  • PoE-out on Ethernet10 up to 57 V for powering a remote AP or CPE

• RouterOS v7 License Level 5
  Full RouterOS feature set ships preinstalled with free software updates for the product lifetime or minimum five years.

Specifications

What’s in the Box

• RB4011iGS+5HacQ2HnD-IN wireless router unit

• 24 V 2.5 A power adapter

• IEC power cord

• K-59 mounting kit

Why Choose RB4011iGS+5HacQ2HnD-IN

• Ten Gigabit ports and SFP+ uplink consolidate branch routing without a separate switch for small office LANs.

• Integrated 4×4 5 GHz and 2×2 2.4 GHz radios remove the need for an external access point in compact deployments.

• Passive PoE-out on port 10 powers a downstream MikroTik CPE or AP from the same chassis.

• Quad-core AL21400 CPU and IPsec acceleration support VPN-heavy MSP and enterprise edge roles.

• RouterOS v7 license level 5 delivers full routing, firewall, and wireless controller capability on day one.